...
| Code Block |
|---|
root@GMK-G9:~# sensors coretemp-isa-0000 Adapter: ISA adapter Package id 0: +48.0°C (high = +105.0°C, crit = +105.0°C) Core 0: +47.0°C (high = +105.0°C, crit = +105.0°C) Core 1: +47.0°C (high = +105.0°C, crit = +105.0°C) Core 2: +47.0°C (high = +105.0°C, crit = +105.0°C) Core 3: +47.0°C (high = +105.0°C, crit = +105.0°C) acpitz-acpi-0 Adapter: ACPI interface temp1: +27.8°C iwlwifi_1-virtual-0 Adapter: Virtual device temp1: +44.0°C |
sensors 2
ubuntu 24.04 with NVMe disks
| Code Block |
|---|
root@server5:~/it87# sensors
iwlwifi_1-virtual-0
Adapter: Virtual device
temp1: N/A
acpitz-acpi-0
Adapter: ACPI interface
temp1: +27.8°C
coretemp-isa-0000
Adapter: ISA adapter
Package id 0: +61.0°C (high = +105.0°C, crit = +105.0°C)
Core 0: +58.0°C (high = +105.0°C, crit = +105.0°C)
Core 1: +58.0°C (high = +105.0°C, crit = +105.0°C)
Core 2: +59.0°C (high = +105.0°C, crit = +105.0°C)
Core 3: +59.0°C (high = +105.0°C, crit = +105.0°C)
nvme-pci-0800
Adapter: PCI adapter
Composite: +50.9°C (low = -273.1°C, high = +81.8°C)
(crit = +84.8°C)
Sensor 1: +50.9°C (low = -273.1°C, high = +65261.8°C)
Sensor 2: +54.9°C (low = -273.1°C, high = +65261.8°C)
nvme-pci-0100
Adapter: PCI adapter
Composite: +45.9°C (low = -273.1°C, high = +81.8°C)
(crit = +84.8°C)
Sensor 1: +45.9°C (low = -273.1°C, high = +65261.8°C)
Sensor 2: +55.9°C (low = -273.1°C, high = +65261.8°C)
nvme-pci-0200
Adapter: PCI adapter
Composite: +48.9°C (low = -273.1°C, high = +81.8°C)
(crit = +84.8°C)
Sensor 1: +48.9°C (low = -273.1°C, high = +65261.8°C)
Sensor 2: +55.9°C (low = -273.1°C, high = +65261.8°C)
nvme-pci-0700
Adapter: PCI adapter
Composite: +48.9°C (low = -273.1°C, high = +81.8°C)
(crit = +84.8°C)
Sensor 1: +48.9°C (low = -273.1°C, high = +65261.8°C)
Sensor 2: +55.9°C (low = -273.1°C, high = +65261.8°C) |
cpupower
| Code Block |
|---|
root@GMK-G9:~# cpupower frequency-info
analyzing CPU 2:
driver: intel_pstate
CPUs which run at the same hardware frequency: 2
CPUs which need to have their frequency coordinated by software: 2
maximum transition latency: Cannot determine or is not supported.
hardware limits: 700 MHz - 3.60 GHz
available cpufreq governors: performance powersave
current policy: frequency should be within 700 MHz and 3.60 GHz.
The governor "powersave" may decide which speed to use
within this range.
current CPU frequency: Unable to call hardware
current CPU frequency: 1.40 GHz (asserted by call to kernel)
boost state support:
Supported: yes
Active: yes
|
...