# dmesg
[ 0.000000] Linux version 5.10.4-tag- (bugu@bugu-desktop) (riscv64-unknown-linux-musl-gcc (Xuantie-900 linux-5.10.4 musl gcc Toolchain V2.6.1 B-20220906) 10.2.0, GNU ld (GNU Binutils) 2.35) #31 PREEMPT Wed Nov 13 09:55:48 CST 2024
[ 0.000000] earlycon: sbi0 at I/O port 0x0 (options '')
[ 0.000000] printk: bootconsole [sbi0] enabled
[ 0.000000] efi: UEFI not found.
[ 0.000000] Initial ramdisk at: 0x(____ptrval____) (2531328 bytes)
[ 0.000000] Ion: Ion memory setup at 0x000000008b300000 size 75 MiB
[ 0.000000] OF: reserved mem: initialized node ion, compatible id ion-region
[ 0.000000] Zone ranges:
[ 0.000000] DMA32 [mem 0x0000000080000000-0x000000008fdfffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080000000-0x000000008fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000008fdfffff]
[ 0.000000] On node 0 totalpages: 65024
[ 0.000000] DMA32 zone: 889 pages used for memmap
[ 0.000000] DMA32 zone: 0 pages reserved
[ 0.000000] DMA32 zone: 65024 pages, LIFO batch:15
[ 0.000000] SBI specification v0.3 detected
[ 0.000000] SBI implementation ID=0x1 Version=0x9
[ 0.000000] SBI v0.2 TIME extension detected
[ 0.000000] SBI v0.2 IPI extension detected
[ 0.000000] SBI v0.2 RFENCE extension detected
[ 0.000000] riscv: ISA extensions acdfimsuv
[ 0.000000] riscv: ELF capabilities acdfimv
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64135
[ 0.000000] Kernel command line: root=/dev/mmcblk0p2 rootwait rw console=ttyS0,115200 earlycon=sbi riscv.fwsz=0x80000 release loglevel=0
[ 0.000000] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.000000] Sorting __ex_table...
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 159148K/260096K available (5537K kernel code, 645K rwdata, 2370K rodata, 172K init, 261K bss, 100948K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] riscv-intc: 64 local interrupts mapped
[ 0.000000] plic: interrupt-controller@70000000: mapped 101 interrupts with 1 handlers for 2 contexts.
[ 0.000000] random: get_random_bytes called from start_kernel+0x2e0/0x41c with crng_init=0
[ 0.000000] riscv_timer_init_dt: Registering clocksource cpuid [0] hartid [0]
[ 0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[ 0.000008] sched_clock: 64 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[ 0.000150] Console: colour dummy device 80x25
[ 0.000200] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=100000)
[ 0.000218] pid_max: default: 4096 minimum: 301
[ 0.000379] Mount-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
[ 0.000395] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
[ 0.001816] ASID allocator initialised with 65536 entries
[ 0.001955] rcu: Hierarchical SRCU implementation.
[ 0.002657] EFI services will not be available.
[ 0.003044] devtmpfs: initialized
[ 0.008014] early_time_log: do_initcalls: 3818893us
[ 0.009085] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.009109] futex hash table entries: 16 (order: -4, 384 bytes, linear)
[ 0.009208] pinctrl core: initialized pinctrl subsystem
[ 0.009726] NET: Registered protocol family 16
[ 0.010276] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
[ 0.010350] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.011023] thermal_sys: Registered thermal governor 'step_wise'
[ 0.026364] OF: /gpio@03020000/gpio-controller@0: could not find phandle
[ 0.026442] OF: /gpio@03021000/gpio-controller@1: could not find phandle
[ 0.026512] OF: /gpio@03022000/gpio-controller@2: could not find phandle
[ 0.026580] OF: /gpio@03023000/gpio-controller@3: could not find phandle
[ 0.026645] OF: /gpio@05021000/gpio-controller@4: could not find phandle
[ 0.028784] clk reset: nr_reset=64 resource_size=8
[ 0.029394] get audio clk=24576000
[ 0.029458] cvitek-i2s-subsys 4108000.i2s_subsys: Set clk_sdma_aud0~3 to 24576000
[ 0.046845] dw_dmac 4330000.dma: CVITEK DMA Controller, 8 channels, probe done!
[ 0.047564] SCSI subsystem initialized
[ 0.047870] usbcore: registered new interface driver usbfs
[ 0.047955] usbcore: registered new interface driver hub
[ 0.048052] usbcore: registered new device driver usb
[ 0.050104] mc: Linux media interface: v0.10
[ 0.050178] videodev: Linux video capture interface: v2.00
[ 0.050674] Ion: ion_parse_dt_heap_common: id 0 type 2 name carveout align 1000
[ 0.051311] Ion: rmem_ion_device_init: heap carveout base 0x000000008b300000 size 0x0000000004b00000 dev (____ptrval____)
[ 0.051326] ion_carveout_heap_create, size=0x4b00000
[ 0.051469] cvi_get_rtos_ion_size, rtos ion_size get:0x1600000
[ 0.051478] ion_carveout_heap_create, size(exclusion of rtos_ion_size)=0x3500000
[ 0.266158] platform carveout: [ion] add heap id 0, type 2, base 0x8b300000, size 0x4b00000
[ 0.266558] Advanced Linux Sound Architecture Driver Initialized.
[ 0.267229] Bluetooth: Core ver 2.22
[ 0.267304] NET: Registered protocol family 31
[ 0.267314] Bluetooth: HCI device and connection manager initialized
[ 0.267332] Bluetooth: HCI socket layer initialized
[ 0.267358] Bluetooth: L2CAP socket layer initialized
[ 0.267393] Bluetooth: SCO socket layer initialized
[ 0.268082] clocksource: Switched to clocksource riscv_clocksource
[ 0.279814] NET: Registered protocol family 2
[ 0.280883] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 0.280924] TCP established hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.280963] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.280994] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.281128] UDP hash table entries: 128 (order: 0, 4096 bytes, linear)
[ 0.281160] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes, linear)
[ 0.281346] NET: Registered protocol family 1
[ 0.281980] RPC: Registered named UNIX socket transport module.
[ 0.281992] RPC: Registered udp transport module.
[ 0.281998] RPC: Registered tcp transport module.
[ 0.282004] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.282298] Unpacking initramfs...
[ 0.437574] Freeing initrd memory: 2468K
[ 0.438393] Initialise system trusted keyrings
[ 0.438613] workingset: timestamp_bits=62 max_order=16 bucket_order=0
[ 0.444806] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.445867] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.513550] Key type asymmetric registered
[ 0.513564] Asymmetric key parser 'x509' registered
[ 0.519066] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
[ 0.521440] printk: console [ttyS0] disabled
[ 0.521540] 4140000.serial: ttyS0 at MMIO 0x4140000 (irq = 17, base_baud = 1562500) is a 16550A
[ 0.521614] printk: console [ttyS0] enabled
[ 0.521623] printk: bootconsole [sbi0] disabled
[ 0.522705] 4150000.serial: ttyS1 at MMIO 0x4150000 (irq = 18, base_baud = 1562500) is a 16550A
[ 0.523612] 4160000.serial: ttyS2 at MMIO 0x4160000 (irq = 19, base_baud = 1562500) is a 16550A
[ 0.524597] 4170000.serial: ttyS3 at MMIO 0x4170000 (irq = 20, base_baud = 1562500) is a 16550A
[ 0.533946] loop: module loaded
[ 0.539499] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[ 0.539512] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[ 0.540284] libphy: Fixed MDIO Bus: probed
[ 0.540298] tun: Universal TUN/TAP device driver, 1.6
[ 0.540971] bm-dwmac 4070000.ethernet: IRQ eth_wake_irq not found
[ 0.540986] bm-dwmac 4070000.ethernet: IRQ eth_lpi not found
[ 0.541083] bm-dwmac 4070000.ethernet: Hash table entries set to unexpected value 0
[ 0.541202] bm-dwmac 4070000.ethernet: no reset control found
[ 0.541427] bm-dwmac 4070000.ethernet: User ID: 0x10, Synopsys ID: 0x37
[ 0.541446] bm-dwmac 4070000.ethernet: DWMAC1000
[ 0.541457] bm-dwmac 4070000.ethernet: DMA HW capability register supported
[ 0.541466] bm-dwmac 4070000.ethernet: RX Checksum Offload Engine supported
[ 0.541476] bm-dwmac 4070000.ethernet: COE Type 2
[ 0.541484] bm-dwmac 4070000.ethernet: TX Checksum insertion supported
[ 0.541493] bm-dwmac 4070000.ethernet: Normal descriptors
[ 0.541502] bm-dwmac 4070000.ethernet: Ring mode enabled
[ 0.541510] bm-dwmac 4070000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 0.541523] bm-dwmac 4070000.ethernet: device MAC address 6e:88:98:5d:39:bd
[ 0.565162] libphy: stmmac: probed
[ 0.565188] CVITEK CV182XA stmmac-0:00: attached PHY driver [CVITEK CV182XA] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
[ 0.565205] CVITEK CV182XA stmmac-0:01: attached PHY driver [CVITEK CV182XA] (mii_bus:phy_addr=stmmac-0:01, irq=POLL)
[ 0.566400] bm-dwmac 4070000.ethernet: Cannot get clk_500m_eth!
[ 0.566438] bm-dwmac 4070000.ethernet: Cannot get gate_clk_axi4!
[ 0.567535] dwc2 4340000.usb: axi clk installed
[ 0.567551] dwc2 4340000.usb: apb clk installed
[ 0.567562] dwc2 4340000.usb: 125m clk installed
[ 0.567572] dwc2 4340000.usb: 33k clk installed
[ 0.567582] dwc2 4340000.usb: 12m clk installed
[ 0.567668] dwc2 4340000.usb: EPs: 8, dedicated fifos, 3072 entries in SPRAM
[ 0.568401] dwc2 4340000.usb: DWC OTG Controller
[ 0.568445] dwc2 4340000.usb: new USB bus registered, assigned bus number 1
[ 0.568492] dwc2 4340000.usb: irq 41, io mem 0x04340000
[ 0.569320] hub 1-0:1.0: USB hub found
[ 0.569378] hub 1-0:1.0: 1 port detected
[ 0.570717] usbcore: registered new interface driver cdc_acm
[ 0.570729] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 0.570836] usbcore: registered new interface driver usb-storage
[ 0.570987] usbcore: registered new interface driver option
[ 0.571036] usbserial: USB Serial support registered for GSM modem (1-port)
[ 0.571509] i2c /dev entries driver
[ 0.572491] usbcore: registered new interface driver uvcvideo
[ 0.572502] USB Video Class driver (1.1.1)
[ 0.573579] Bluetooth: HCI UART driver ver 2.3
[ 0.573593] Bluetooth: HCI UART protocol H4 registered
[ 0.573600] Bluetooth: HCI UART protocol BCSP registered
[ 0.573645] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 0.574107] sdhci: Secure Digital Host Controller Interface driver
[ 0.574116] sdhci: Copyright(c) Pierre Ossman
[ 0.574122] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.574389] cvi:sdhci_cvi_probe
[ 0.620097] mmc0: SDHCI controller on 4310000.cv-sd [4310000.cv-sd] using ADMA 64-bit
[ 0.620113] cvi_proc_init cvi_host 0x(____ptrval____)
[ 0.620266] cvi:sdhci_cvi_probe
[ 0.652662] mmc1: SDHCI controller on 4320000.wifi-sd [4320000.wifi-sd] using ADMA 64-bit
[ 0.653793] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.654101] usbcore: registered new interface driver usbhid
[ 0.654111] usbhid: USB HID core driver
[ 0.655686] cvitek-i2s 4100000.i2s: cvi_i2s_probe
[ 0.656224] cvitek-i2s 4130000.i2s: cvi_i2s_probe
[ 0.656925] cviteka-adc sound_adc: cviteka_adc_probe, dev name=sound_adc
[ 0.656952] cviteka-adc sound_adc: cviteka_adc_probe start devm_snd_soc_register_card
[ 0.657264] cvitekaadc 300a100.adc: cvitekaadc_probe
[ 0.657503] adc: set volume 20
[ 0.658020] cviteka-dac sound_dac: cviteka_dac_probe, dev name=sound_dac
[ 0.658471] cvitekadac 300a000.dac: cvitekadac_probe
[ 0.658786] cvitekadac_probe gpio_is_valid mute_pin_l
[ 0.658796] cvitekadac_probe gpio_is_valid mute_pin_r
[ 0.661557] xt_time: kernel timezone is -0000
[ 0.661605] IPVS: Registered protocols ()
[ 0.661665] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
[ 0.661902] IPVS: ipvs loaded.
[ 0.662502] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
[ 0.663102] NET: Registered protocol family 10
[ 0.664844] Segment Routing with IPv6
[ 0.666480] NET: Registered protocol family 17
[ 0.666650] Bluetooth: RFCOMM TTY layer initialized
[ 0.666673] Bluetooth: RFCOMM socket layer initialized
[ 0.666707] Bluetooth: RFCOMM ver 1.11
[ 0.666729] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 0.666745] Bluetooth: BNEP socket layer initialized
[ 0.666755] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 0.666769] Bluetooth: HIDP socket layer initialized
[ 0.667074] Loading compiled-in X.509 certificates
[ 0.704782] mmc0: new high speed SDHC card at address 0001
[ 0.705469] i2c_designware 4040000.i2c: running with gpio recovery mode! scl,sda
[ 0.706913] cviteka-adc sound_adc: cviteka_adc_probe, dev name=sound_adc
[ 0.706929] cviteka-adc sound_adc: cviteka_adc_probe start devm_snd_soc_register_card
[ 0.711941] mmcblk0: mmc0:0001 SD32G 29.2 GiB
[ 0.713070] cviteka-dac sound_dac: cviteka_dac_probe, dev name=sound_dac
[ 0.715008] mmcblk0: p1 p2 p3
[ 0.721332] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[ 0.722122] ALSA device list:
[ 0.722353] dw-apb-uart 4140000.serial: forbid DMA for kernel console
[ 0.722558] Freeing unused kernel memory: 172K
[ 0.722566] Kernel memory protection not selected by kernel config.
[ 0.722588] Run /init as init process
[ 0.722597] with arguments:
[ 0.722606] /init
[ 0.722710] release
[ 0.722716] with environment:
[ 0.722722] HOME=/
[ 0.722728] TERM=linux
[ 0.722737] early_time_log: run_init_process: 4533621us
[ 1.338226] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.385935] random: fast init done
[ 1.602199] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 1.758788] soph_sys: bad vermagic: kernel tainted.
[ 1.758800] Disabling lock debugging due to kernel taint
[ 1.758810] soph_sys: loading out-of-tree module taints kernel.
[ 1.785937] CVITEK CHIP ID = 18
[ 1.796922] name=1900000.rtos_cmdqu
[ 1.797123] res-reg: start: 0x1900000, end: 0x1900fff, virt-addr(ffffffd005b9d000).
[ 1.797387] [cvi_spinlock_init] success
[ 2.012111] RTOS_CMDQU_SEND_WAIT timeout
[ 2.012121] SYS_CMD_INFO_LINUX_INIT_DONE fail
[ 2.012154] communicate with rtos fail
[ 2.030300] cif a0c2000.cif: cam0 clk installed
[ 2.030346] cif a0c2000.cif: cam1 clk installed
[ 2.030368] cif a0c2000.cif: vip_sys_2 clk installed
[ 2.030392] cif a0c2000.cif: clk_mipimpll clk installed (____ptrval____)
[ 2.030416] cif a0c2000.cif: clk_disppll clk installed (____ptrval____)
[ 2.030440] cif a0c2000.cif: clk_fpll clk installed (____ptrval____)
[ 2.030466] cif a0c2000.cif: (0) res-reg: start: 0xa0c2000, end: 0xa0c3fff.
[ 2.030476] cif a0c2000.cif: virt-addr((____ptrval____))
[ 2.030494] cif a0c2000.cif: (1) res-reg: start: 0xa0d0000, end: 0xa0d0fff.
[ 2.030503] cif a0c2000.cif: virt-addr((____ptrval____))
[ 2.030520] cif a0c2000.cif: (2) res-reg: start: 0xa0c4000, end: 0xa0c5fff.
[ 2.030530] cif a0c2000.cif: virt-addr((____ptrval____))
[ 2.030547] cif a0c2000.cif: (3) res-reg: start: 0xa0c6000, end: 0xa0c7fff.
[ 2.030556] cif a0c2000.cif: virt-addr((____ptrval____))
[ 2.030575] cif a0c2000.cif: (4) res-reg: start: 0x3001c30, end: 0x3001c5f.
[ 2.030584] cif a0c2000.cif: virt-addr((____ptrval____))
[ 2.030595] cif a0c2000.cif: no pad_ctrl for cif
[ 2.030665] cif a0c2000.cif: request irq-30 as cif-irq0
[ 2.030723] cif a0c2000.cif: request irq-31 as cif-irq1
[ 2.030863] cif a0c2000.cif: rst_pin = 361, pol = 0
[ 2.030890] cif a0c2000.cif: phy0 reset installed
[ 2.030910] cif a0c2000.cif: phy0 apb reset installed
[ 2.030936] cif a0c2000.cif: phy1 reset installed
[ 2.030956] cif a0c2000.cif: phy1 apb reset installed
[ 2.038223] snsr_i2c snsr_i2c: i2c:-------hook 0
[ 2.038329] snsr_i2c snsr_i2c: i2c:-------hook 1
[ 2.038417] snsr_i2c snsr_i2c: i2c:-------hook 3
[ 2.038505] snsr_i2c snsr_i2c: i2c:-------hook 4
[ 2.200333] cvi_dwa_probe:487(): done with rc(0).
[ 2.260260] cooling cooling: elems of dev-freqs=6
[ 2.260289] cooling cooling: dev_freqs[0]: 850000000 500000000
[ 2.260300] cooling cooling: dev_freqs[1]: 425000000 375000000
[ 2.260310] cooling cooling: dev_freqs[2]: 425000000 300000000
[ 2.260410] cooling cooling: Cooling device registered: cooling
[ 2.285205] [INFO] Register SBM IRQ ###################################
[ 2.285230] [INFO] pvctx->s_sbm_irq = 38
[ 2.293817] jpu ctrl reg pa = 0xb030000, va = (____ptrval____), size = 256
[ 2.294127] end jpu_init result = 0x0
[ 2.435294] cvi_vc_drv_init result = 0x0
[ 2.441567] cvi_rtc 5026000.rtc: time read as 1743588422. 4/2/2025 10:07:02
[ 2.441587] cvi_rtc 5026000.rtc: CVITEK current time 1743588422
[ 2.441596] cvi_rtc 5026000.rtc: CVITEK current alarm -1
[ 2.441615] cvi_rtc 5026000.rtc: time read as 1743588422. 4/2/2025 10:07:02
[ 2.442011] cvi_rtc 5026000.rtc: registered as rtc0
[ 2.442034] cvi_rtc 5026000.rtc: time read as 1743588422. 4/2/2025 10:07:02
[ 2.442073] cvi_rtc 5026000.rtc: setting system clock to 2025-04-02T10:07:02 UTC (1743588422)
[ 2.452346] cvi_rtc 5026000.rtc: rtc 32k calibration has been completed
[ 2.452362] cvi_rtc 5026000.rtc: CVITEK real time clock
[ 3.003957] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 3.168923] random: crng init done
[ 3.370857] using random self ethernet address
[ 3.370875] using random host ethernet address
[ 3.400848] Mass Storage Function, version: 2009/09/11
[ 3.400873] LUN: removable file: (no medium)
[ 3.416705] usb0: HOST MAC 66:92:25:31:7a:4f
[ 3.416875] usb0: MAC 1a:fb:c6:1e:26:5d
[ 3.417525] dwc2 4340000.usb: bound driver configfs-gadget
[ 3.598708] dwc2 4340000.usb: new device is high-speed
[ 3.662683] udevd[269]: starting version 3.2.14
[ 3.725069] udevd[270]: starting eudev-3.2.14
[ 3.791859] dwc2 4340000.usb: new device is high-speed
[ 4.035412] dwc2 4340000.usb: new address 4
[ 6.007555] bm-dwmac 4070000.ethernet eth0: PHY [stmmac-0:00] driver [CVITEK CV182XA] (irq=POLL)
[ 6.016151] dwmac1000: Master AXI performs any burst length
[ 6.016179] bm-dwmac 4070000.ethernet eth0: No Safety Features support found
[ 6.016198] bm-dwmac 4070000.ethernet eth0: IEEE 1588-2002 Timestamp supported
[ 6.023478] bm-dwmac 4070000.ethernet eth0: configuring for phy/rmii link mode
[ 6.307467] i2c-gpio i2c5@gpio: using lines 507 (SDA) and 495 (SCL)
[ 6.462365] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 6.477895] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 6.520241] aicbsp_init
[ 6.520252] RELEASE_DATE:2024_0109_ec460377
[ 6.520258] aicbsp_resv_mem_init
[ 6.636378] aicbsp: aicbsp_set_subsys, subsys: AIC_WIFI, state to: 1
[ 6.636391] aicbsp: aicbsp_set_subsys, power state change to 1 dure to AIC_WIFI
[ 6.636397] aicbsp: aicbsp_platform_power_on
[ 8.069395] bm-dwmac 4070000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 8.069442] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 8.660277] aicbsp: aicbsp_set_subsys, fail to set AIC_WIFI power state to 1
[ 8.660292] AICWFDBG(LOGERROR) rwnx_mod_init, set power on fail!
[ 8.700859] aicbsp: aicbsp_set_subsys, subsys: AIC_WIFI, state to: 1
[ 8.700872] aicbsp: aicbsp_set_subsys, power state change to 1 dure to AIC_WIFI
[ 8.700878] aicbsp: aicbsp_platform_power_on
[ 10.740200] aicbsp: aicbsp_set_subsys, fail to set AIC_WIFI power state to 1
[ 10.740215] AICWFDBG(LOGERROR) rwnx_mod_init, set power on fail!
[ 16.616885] vb_get_pool_info:536(): NULL VB HANDLE
[ 16.618011] vb_get_pool_info:536(): NULL VB HANDLE
[ 16.920353] vpss_open
[ 17.612013] vi_event_handler exit
[ 17.640556] vpss_release
[ 17.642802] vb_get_pool_info:536(): NULL VB HANDLE
[ 17.643928] vb_get_pool_info:536(): NULL VB HANDLE
[ 17.645126] vpss_open
|