Brief
command | command with options | description | ||
---|---|---|---|---|
reboot | reboot yes | reboot | ||
poweroff | poweroff yes | poweroff | ||
corefreq | corefreq | SoC frequencies | ||
dramfreq | dramfreq | Memory frequency | ||
ver | ver | version info | ||
cardmgr | info | cardmgr d info | disk a,d,z info (type, fs, size) | |
date | date -s 2016/10/04 01:41:00 | see/set date and time | ||
drives | drives | present drives | ||
format | format d FAT32 | format SD card | ||
hal | get SoC type | |||
sleep | sleep 3 | 3 sec pause | ||
time | time ls | measure time that cammond execution take | ||
vol | vol d SD16GB | change disk label | ||
romfs | ls | romfs ls | list files from romfs | |
dmesg | dmesg rtos -200 | see 200 last lines of OS logs | ||
t | app | APPLICATION | ||
t | app | key | t app key record | press REC key to start/stop recording |
t app key shutter | press SHUTTER key to make photo | |||
t app key mode | switch between camera modes photo/video/play | |||
t app key power | poweroff | |||
t app key menu | Show menu | |||
t | app | mempool | t app mempool | memory info |
t | app | test | t app test vin_rotate 180 | rotate video |
t app test disp_rotate 2 | rotate display 180 deg. | |||
t app test debug_dump | enable/disable debu dumps | |||
t app test csc_vin | test video sensor | |||
t app test jack_switch_pb | switch AV in/out mode | |||
t | app | dzoom | t app dzoom jump -1 | Switch to maximum digital zoom |
t app dzoom jump 0 | No digital zoom | |||
t app dzoom jump 140 | Set level of digital zoom [0-486] | |||
t | cal | CALIBRATION | ||
t | cal | -3a | t cal -3a on | Auto ON (AE, AF, Auto WB) |
t cal -3a off | Auto OFF (AE, AF, Auto WB) | |||
t | cal | -sc | t cal -sc 0 | Select Scene mode 0 .. N |
t | cal | -de | t cal -de 2 | Select digital effect (2-Sepia, 4 -B/W) |
t | cal | -ae | t cal -ae info | Get Auto Exposure status |
t | cal | -me | t cal -me 0 0 978 0 4096 | Manual Exposure setup |
t | cal | -vnc | t cal -vnc info | Vignette calibration |
t | cal | -fpn | t cal -fpn info | Fixed pattern noice calibration |
t | ia2 | -warp | t ia2 -warp 1 | dewarp on |
t ia2 -warp 0 | dewarp off | |||
t | ia2 | -exp | t ia2 -exp info | Exposure info |
t | ia2 | -dzoom | t ia2 -dzoom info | Get digital zoom info |
t ia2 -dzoom jump 0 | Digital zoom out | |||
t | ia2 | -warp | t ia2 -warp info | dewarp info |
t | ia2 | -eis | t ia2 -eis status | Electronic Image Stabilization |
t | ia2 | -sof | ? | |
t | ia2 | -ae | t ia2 -ae on | enable autoexposure |
t ia2 -ae off | disable autoexposure | |||
t | ia2 | -awb | t ia2 -awb on | enable auto witebalance |
t ia2 -awb off | disable auto witebalance | |||
t | is2 | |||
t | is2 | -aa | t is2 -aa 3 | set maximum antialiasing (0 .. 3) |
t | is2 | -lk | t is2 -lk 1 0 0 0 0 16383 | set leakage filter settings |
t | is2 | -cnf | t is2 -cnf 0 0 | disable color filter array noice filter |
t is2 -cnf 1 1 | enable color filter array noice filter | |||
t | is2 | -cmf | t is2 -cmf 0 0 0 | disable chroma median filter |
t is2 -cmf 1 253 252 | enable chroma median filter | |||
t | is2 | -shp | sharpening filter settings | |
t | is2 | -mctf | Motion Compensated Temporal Filtering (MCTF) | |
t | is2 | -filter_sw | t is2 -filter_sw 0x7fff | enable all kind of filters |
t is2 -filter_sw 0x0 | disable all kind of filters | |||
t | is2 | -resampler | t is2 -resampler 0 | set resampler strenght 0 .. 5 |
t | is2 | -adv_mode | t is2 -adv_mode 1 | switch between dual_chanel and hdr adv modes |
t | sr | crc | t sr crc | count kernel CRC32 |
t | pwc | battery_detect | t pwc battery_detect | Check battery |
t | adc | sense | t adc sense | sense current voltages |
t | sensor | -brief | t sensor -brief | Get image sensor info |
t | sensor | -detail | t sensor -detail | Get detailed sensor info |
t | sensor | -minfo | t sensor -minfo all | Get sensor modes |
t | sd | erase | t sd erase all sd1 | erase data on SD card (w/o format) |
t | audio | beep | t audio beep 0 64 | set maximum sound volume |
t audio beep 0 0 | set sound off |
help
Code Block |
---|
a:\> help
supported built-in commands:
addr2func bp cardmgr cat
cd chmod config cp
cpu date deletedir dmesg
dramcfg drives dsputil echo
eeprom eval false ffuc
format hal help history
hotboot ioerr jobs kill
ls md5 mesg mkboot
mkdir morph mv flashdb
nice poweroff pref ps
pwd ramdisk readb readl
readw reboot reset resume
rm rmdir savebin sleep
suspend sysmon t test
time touch trap true
vol writeb writel writew
yyinfo usbclass ver vin
sm corefreq dramfreq idspfreq
dll cleandir volcfg firmfl
nvd nftl bbt romfs |
date
Code Block |
---|
a:\> date
Sat Jan 01 02:45:56 2028
a:\> date help
Usage: date [-s YYYY/MM/DD HH:MM:SS]
Usage: date [-set_alarm YYYY/MM/DD HH:MM:SS]
Usage: date [-get_alarm]
Usage: date [-clr_alarm]
a:\> date -s 2016/04/08 04:00:00
a:\> date
Fri Apr 08 04:00:02 2016 |
t
Code Block |
---|
a:\> t
supported test commands:
help
app
amba_md
plyr
rec
cal
ia2
is2
audio
disp
dspinfo
sr
ddr
hdmi
msc
aucodec
spi_ahb
pwc
idc
spi
hw_tmr
wdt
uart
stepper_motor
pwm
gpio
adc
vout
sensor
fast_ecn
chk_low_spd
paccess_time
fioffs_thruput
fioffs_uc
fioffs_randvrfy
fioprf_lgfvrfy
fioprf_randvrfy
fioprf_thruput
sd
nand_op
nand |
t dspinfo
Code Block |
---|
a:\> t dspinfo
Usage: t dspinfo
DSP Information ------------------------------------------------
t dspinfo dsp_info - dsp init data
t dspinfo dsp_ver - dsp ucode version
t dspinfo dsp_msg - dsp returned message
Show DSP Command ---------------------------------------------
t dspinfo def_cmd - Show default commands
t dspinfo dsp_cmd [on/off] - Enable/disable ALL dsp command
t dspinfo idsp_cmd [on/off] - Enable/disable idsp command
t dspinfo show_cmd help - Detail info of cmd_code
t dspinfo show_cmd list_ena - List out show enabled cmd_code
t dspinfo show_cmd list_dis - List out show disabled cmd_code
t dspinfo show_cmd [on/off] - Turn on/off ALL dsp cmd info
t dspinfo show_cmd [cmd_code][1/0] - Show single command
[cmd_code] - The code of command to show on
[1/0] - turn on/off to show cmd info
DSP Command utility-------------------------------------------
t dspinfo drvmsg [on/off] - enable/disable dsp driver debug message.
t dspinfo drvmsg dump [file_name] - dump dsp driver debug message to file
t dspinfo drvmsg show [irq#][val] - set dsp driver debug message SHOW mode.
[irq#] - 0, direct apply.
[irq#] - x, Keep showing x VDSP sync.
[val] - show mode val.
t dspinfo drvmsg log [irq#][val] - set dsp driver debug message SHOW mode.
[irq#] - 0, direct apply.
[irq#] - x, Keep showing x VDSP sync.
[val] - show mode val.
t dspinfo pcdump - show DSP PC debug info.
t dspinfo waitvdsp [irq#][timeout(ms)] - wait vdsp interrupt with timeout
IAV Information ------------------------------------------------
t dspinfo vid_proc - video preprocessing information
t dspinfo vout0_info - LCD out dsp data
t dspinfo vout1_info - TV out dsp data
t dspinfo vid_enc - video encode object info
t dspinfo vid_dec - video decode object info
t dspinfo aud_enc - audio encode object info
t dspinfo aud_dec - audio decode object info
t dspinfo pic_enc - picture encode object info
t dspinfo pic_dec - picture decode object info
t dspinfo raw_enc |
help
Code Block |
---|
a:\> help supported built-in commands: addr2func bp cardmgr cat - cdraw encode object info |
t cal
Code Block |
---|
a:\> t cal Usage: t cal [OPTION] VALUE... Supported options: chmod -3a: AAA control config -3a_test: AAA stat regression test cp -sc: Scene mode control cpu -de: Digital effect control date -ae: AE info deletedir -me: Manual dmesgexposure dramcfg-raw: raw capture drives -rawenc: raw encode with manual main window width/heigh dsputil -ituner: ituner echotool eeprom-mgr: Calibration manager CLI tool eval -fpn: FPN tool false-vnc: Vignette tool ffuc -vnc_spec: for warp by spec format -task: WARP decay ratio en/disable hal -warp: WARP tool help -warp_spec: for warp by spec history -ca: CA tool hotboot -gen_ca: Gen CA tool ioerr -jqlt: Set capture jpg jobsquality -bmp: Set dump bmp killenalbe ls-usb: Set remove/insert sdcard |
ps
Code Block |
---|
a:\> ps ID PRI md5 STAT ACT WUP SUS NAME 3 120 mesgWAIT_FLG 0 0 0 mkbootprint_daemon_task 4 16 WAIT_RDTQ mkdir 0 0 0 peri_task morph5 57 WAIT_RDTQ 0 0 mv 0 flashdbbutton_task 6 56 WAIT_RDTQ nice 0 0 0 scardmgr_task 7 poweroff 50 WAIT_RDTQ 0 pref 0 0 psstktask_func 8 37 WAIT_RDTQ pwd 0 0 0 debou_task 9 ramdisk 17 WAIT_RDTQ 0 0 readb 0 audio_init_task 10 45 WAIT_FLG readl 0 0 readw0 Message Manager 11 16 WAIT_FLG reboot 0 0 0 adc reset12 110 READY 0 resume 0 0 ambsh rm13 43 SUSPEND 0 0 rmdir 1 Player thumb motion task 14 51 savebin WAIT_FLG 0 0 sleep 0 Host Control Manager 15 suspend 15 WAIT_FLG 0 sysmon0 0 dsp_vdsp 16 36 t SLEEP 0 0 0 testudf_class_mng_tsk 18 31 WAIT_RDTQ time0 0 0 audio_timer_task 19 touch40 WAIT_RDTQ 0 0 0 trap audio_main_task 20 34 WAIT_RDTQ 0 true 0 0 audio_beep_task 21 vol 32 WAIT_RDTQ 0 0 0 writeb audio_input_process_task 22 32 WAIT_RDTQ 0 writel 0 0 audio_output_process_task 23 writew 78 WAIT_FLG 0 yyinfo0 0 Graphics2 Command Handler 23 usbclass 78 WAIT_FLG 0 ver 0 0 Graphics2 Command Handler 25 17 vin WAIT_FLG 0 0 sm 0 Image VIN Task 26 63 WAIT_FLG corefreq 0 0 0 dramfreq Image Adjust 27 41 idspfreq WAIT_FLG 0 0 dll 0 Recorder State Transition Manager 28 60 cleandirSUSPEND 0 0 volcfg 1 Preview YUV Processor 29 23 firmfl WAIT_FLG 0 0 nvd 0 Recorder Snapshot Shutter Controller 30 14 nftl DELAYED 0 0 0 bbtGSensor detect 31 92 DELAYED 0 romfs |
t - unit tests
Code Block |
---|
a:\> t
supported test commands:
help
app
amba_md
plyr
rec
cal
ia2
is2
audio
disp
dspinfo
sr
ddr
hdmi
msc
aucodec
spi_ahb
pwc
idc
spi
hw_tmr
wdt
uart
stepper_motor
pwm
gpio
adc
vout
sensor
fast_ecn
chk_low_spd
paccess_time
fioffs_thruput
fioffs_uc
fioffs_randvrfy
fioprf_lgfvrfy
fioprf_randvrfy
fioprf_thruput
sd
nand_op
nand |
...
0 0 Monitor By TimerBase
32 26 WAIT_FLG 0 0 0 Framerate monitor (VDSP)
33 50 WAIT_MBX 0 0 0 prfile2
34 48 WAIT_FLG 0 0 0 Graphics2 switch FCHAN vout task
35 47 WAIT_FLG 0 0 0 Graphics2 switch DCHAN vout task
36 81 WAIT_FLG 0 0 0 Recorder Mux Manager
37 66 WAIT_RDTQ 0 0 0 audio_encode_task_0
38 42 WAIT_FLG 0 0 0 Player FLOW CTRL Manager
39 82 WAIT_FLG 0 0 0 Player DeMux Manager
40 79 WAIT_FLG 0 0 0 AMBA Editor2 Command Manager
41 83 WAIT_FLG 0 0 0 AMBA Editor2 Mux/Demux Manager
42 66 WAIT_RDTQ 0 0 0 audio_decode_task_1
43 88 WAIT_FLG 0 0 0 App Async Operation Manager
44 58 DELAYED 0 0 0 App Button Manager
45 35 WAIT_FLG 0 0 0 udc_drv_tsk
46 34 WAIT_FLG 0 0 0 UTMMalarmtsk
47 110 RUNNING 0 0 0 ps |
corefreq
Code Block |
---|
a:\> corefreq
core freq: 156000000
ahb freq: 156000000
apb freq: 78000000
arm freq: 504000000
a:\> dramfreq
dram freq: 396000000
a:\> idspfreq
idsp freq: 252000000
|
romfs ls
Code Block |
---|
a:\> tromfs dspinfo Usage: t dspinfo DSP Information ------------------------------------------------ t dspinfo dsp_info - dsp init data t dspinfo dsp_ver ls Permium.jpg 22125 zhenhui.jpg 30520 BLACKBOX.jpg 12705 vbd_logo.jpg 10705 LINGHANG.jpg 18047 logo.jpg 44534 Bluesonic.jpg 19770 eltrinex.jpg 15359 Nano_logo.jpg 17487 ORLLO_LOGO.jpg 44589 ARMIX.jpg 12134 NEOLINE.jpg 14935 tongmai_logo.jpg - dsp ucode version87592 SHOME_LOGO.jpg t dspinfo dsp_msg 12499 C6000A_ON.jpg 89091 C6000A_OFF.jpg 57127 CASKA.jpg 54972 YILUAN.jpg - dsp returned message Show DSP Command --------------------------------------------- t dspinfo def_cmd30692 DASH_CAMERAS.jpg 94489 BLACKVIEW.jpg 24028 BLACKVIEW_O.jpg 24217 PROLOGY.jpg 20987 LINGDU_OFF.jpg 12430 LINGDU_ON.jpg 17389 DRIVERCAM.jpg 17631 G90_PREST_OFF.jpg - Show default commands t dspinfo dsp_cmd [on/off]98691 G90_PREST_ON.jpg 96280 FALCON.jpg - Enable/disable ALL dsp command t dspinfo idsp_cmd [on/off] - Enable/disable idsp command t dspinfo show_cmd help 22394 SCREEN_OFF.jpg 126855 SCREEN_ON.jpg 126855 FLEXITI.jpg 93515 JASET.jpg 59195 WELKOM.jpg - Detail info of cmd_code t dspinfo show_cmd list_ena 72033 WELKOM_OFF.jpg 60122 start10.jpg 44534 invalid.jpg 14281 GATOR.jpg - List out show enabled cmd_code t dspinfo show_cmd list_dis32956 MANH_OFF.jpg 67830 MANH_ON.jpg - List out show disabled cmd_code t dspinfo show_cmd [on/off]71106 CARSCAM.jpg 73733 CARSCAM_1.jpg 22737 UNIDEN.jpg - Turn on/off ALL dsp cmd info t dspinfo show_cmd [cmd_code][1/0] - Show single command 9657 DIGMA.jpg 33609 UNIDEN_W.jpg 55218 DANEW.jpg 12312 ASTO_ON.jpg 32130 ASTO_OFF.jpg 38427 NGA_ON.jpg [cmd_code]28883 NGA_OFF.jpg - The code of command to show on 33768 IVM.jpg 16785 icn_logo.a 32768 icn_logo.y 32768 icn_logo.uv 32768 plist_effect_cut.jpg 2624 plist_effect_fade_black.jpg 1622 plist_effect_fade_gray.jpg 1625 Gps_Recv1.wav [1/0] - turn on/off to show cmd info DSP Command utility------------------------------------------- t dspinfo drvmsg [on/off] - enable/disable dsp driver debug message. t dspinfo drvmsg dump [file_name] - dump dsp driver debug message to file t dspinfo drvmsg show [irq#][val] - set dsp driver debug message SHOW mode. 32052 Gps_Recv2.wav 33396 Gps_Arecv.wav 29032 Gps_Reto.wav 28252 poweron_12k.pcm 45600 poweroff_12k.pcm 28800 shutter_12k.pcm 6176 short_shutter_12k.pcm 1086 optone_12k.pcm 9300 error_12k.pcm 13920 poweron_11k.pcm 41896 poweroff_11k.pcm 26460 shutter_11k.pcm 5676 short_shutter_11k.pcm 1000 optone_11k.pcm 8546 error_11k.pcm 12790 poweron_8k.pcm 30402 poweroff_8k.pcm 19200 shutter_8k.pcm 4120 short_shutter_8k.pcm 724 optone_8k.pcm 6202 error_8k.pcm 9282 overspeed_warning.wav 17738 Danger_LDWS.pcm 58482 Danger_LDWS_B.wav 32226 Danger_FCWS.wav 54886 Speed_Cam.wav 38800 Avg_Spd_Cam.wav [irq#]43442 Red_Light_Cam.wav - 0, direct apply. 43764 Red_Light_Speed_Cam.wav 58684 emergency.wav 40748 GPS_Con.wav 120894 menu.wav 30928 no_sd.wav 42888 photo_mode.wav [irq#] 35474 play_mode.wav 38748 record_mode.wav 40954 poweroff.wav - x, Keep showing x VDSP sync. 69400 poweron.wav 61494 poweroff_15s.wav 52274 poweroff_30s.wav 52006 poweroff_60s.wav 53236 start_rec.wav 34318 stop_rec.wav [val] - show mode val. t dspinfo drvmsg log [irq#][val] - set dsp driver debug message SHOW mode. 35370 no_power.wav 52006 1_48k.aac 171 1_44k.aac 185 1_32k.aac 256 2_48k.aac 342 2_44k.aac 372 2_32k.aac [irq#] 512 2_48k.ac3 - 0, direct apply. 768 2_44k.ac3 768 2_32k.ac3 768 6_48k.ac3 1536 6_44k.ac3 [irq#] 1536 6_32k.ac3 - x, Keep showing x VDSP sync. 1536 dec_cc_3D 16384 dec_cc_in 2304 cour.ttf 4627488 bitmaps.bin 8929804 strings.bin [val] - show mode val. t dspinfo pcdump 380908 A7L_CC_reg_1_1.bin 18752 calib6.bin 65536 calib16.bin 65536 A5S_CC_reg_ver_1_1.bin 18752 A5S_default_cc_3d_video.bin - show DSP PC debug info. t dspinfo waitvdsp [irq#][timeout(ms)] - wait vdsp interrupt with timeout IAV Information ------------------------------------------------ t dspinfo vid_proc 17536 A5S_default_cc_3d_still.bin 17536 A5S_default_cc_3d_hiiso.bin 17536 param_image_param_release.bin 0 param_aaa_param_release.bin 0 param_adj_photo_preview_param_release.bin 0 param_adj_video_tv_param_release.bin 0 param_adj_video_pc_param_release.bin 0 param_de_still_param_release.bin - video preprocessing information t dspinfo vout0_info0 param_de_video_param_release.bin 0 param_de_still_multi_param_release.bin 0 param_de_video_multi_param_release.bin 0 param_adj_still_fast_param_release.bin 0 param_adj_still_low_iso_param_release.bin - LCD out dsp data t dspinfo vout1_info 0 param_adj_still_high_iso_param_release.bin 0 param_adj_still_mf_hiso_param_release.bin - TV out dsp data t dspinfo vid_enc 0 param_adj_piv_low_iso_param_release.bin 0 param_adj_still_mid_iso_param_release.bin 0 param_adj_still_hdr_hiso_param_release.bin 0 param_adj_still_hdr_miso_param_release.bin - video encode object info t dspinfo vid_dec - video decode object info t dspinfo aud_enc - audio encode object info t dspinfo aud_dec - audio decode object info t dspinfo pic_enc - picture encode object info t dspinfo pic_dec - picture decode object info t dspinfo raw_enc - raw encode object info |
...
0
param_adj_still_sr_param_release.bin 0
param_set01_param_release.bin 0
param_set02_param_release.bin 0
param_set03_param_release.bin 0
param_set04_param_release.bin 0
param_set05_param_release.bin 0
A5S_CC_3d_color_0_video_0.bin 17536
A5S_CC_3d_color_0_video_1.bin 17536
A5S_CC_3d_color_0_video_2.bin 17536
A5S_CC_3d_color_0_video_3.bin 17536
A5S_CC_3d_color_0_video_4.bin 17536
A5S_CC_3d_color_0_still_0.bin 17536
A5S_CC_3d_color_0_still_1.bin 17536
A5S_CC_3d_color_0_still_2.bin 17536
A5S_CC_3d_color_0_still_3.bin 17536
A5S_CC_3d_color_0_still_4.bin 17536
A5S_CC_3d_color_1_video_0.bin 17536
A5S_CC_3d_color_1_video_1.bin 17536
A5S_CC_3d_color_1_video_2.bin 17536
A5S_CC_3d_color_1_video_3.bin 17536
A5S_CC_3d_color_1_video_4.bin 17536
A5S_CC_3d_color_1_still_0.bin 17536
A5S_CC_3d_color_1_still_1.bin 17536
A5S_CC_3d_color_1_still_2.bin 17536
A5S_CC_3d_color_1_still_3.bin 17536
A5S_CC_3d_color_1_still_4.bin 17536
A7L_high_iso/08_cc_reg_l4c_edge.bin 2304
A7L_high_iso/09_cc_3d_l4c_edge.bin 16384
A7L_high_iso/17_fir1_mix_4x.bin 256
A7L_high_iso/18_fir1_mix_2x.bin 256
A7L_high_iso/31_fir1_l4c_edge.bin 256
A7L_high_iso/32_coring_l4c_edge.bin 256
A7L_high_iso/35_alpha_unity.bin 512
TWDZG.txt 202746
TWDZG_data.txt 800744
file count 177 |
Sensor modes
Code Block |
---|
a:\> ps t IDsensor PRI STAT ACT WUP SUS NAME 3 120 WAIT_FLG 0 0 0 print_daemon_task 4 16 WAIT_RDTQ 0 0 0 peri_task 5 57 WAIT_RDTQ 0 0 0 button_task 6 56 WAIT_RDTQ 0 0 0 scardmgr_task 7 50 WAIT_RDTQ 0 0 0 stktask_func 8 37 WAIT_RDTQ 0 0 0 debou_task 9 17 WAIT_RDTQ 0 0 0 audio_init_task 10 45 WAIT_FLG 0 0 0 Message Manager 11 16 WAIT_FLG 0 0 0 adc 12 110 READY 0 0 0 ambsh 13 43 SUSPEND 0 0 1 Player thumb motion task 14 51 WAIT_FLG 0 0 0 Host Control Manager 15 15 WAIT_FLG 0 0 0 dsp_vdsp 16 36 SLEEP 0 0 0 udf_class_mng_tsk 18 31 WAIT_RDTQ 0 0 0 audio_timer_task 19 40 WAIT_RDTQ 0 0 0 audio_main_task 20 34 WAIT_RDTQ 0 0 0 audio_beep_task 21 32 WAIT_RDTQ 0 0 0 audio_input_process_task 22 32 WAIT_RDTQ 0 0 0 audio_output_process_task 23 78 WAIT_FLG 0 0 0 Graphics2 Command Handler 23 78 WAIT_FLG 0 0 0 Graphics2 Command Handler 25 17 WAIT_FLG 0 0 0 Image VIN Task 26 63 WAIT_FLG 0 0 0 Image Adjust 27 41 WAIT_FLG 0 0 0 Recorder State Transition Manager 28 60 SUSPEND 0 0 1 Preview YUV Processor 29 23 WAIT_FLG 0 0 0 Recorder Snapshot Shutter Controller 30 14 DELAYED 0 0 0 GSensor detect 31 92 DELAYED 0 0 0 Monitor By TimerBase 32 26 WAIT_FLG 0 0 0 Framerate monitor (VDSP) 33 50 WAIT_MBX 0 0 0 prfile2 34 48 WAIT_FLG 0 0 0 Graphics2 switch FCHAN vout task 35 47 WAIT_FLG 0 0 0 Graphics2 switch DCHAN vout task 36 81 WAIT_FLG 0 0 0 Recorder Mux Manager 37 66 WAIT_RDTQ 0 0 0 audio_encode_task_0 38 42 WAIT_FLG 0 0 0 Player FLOW CTRL Manager 39 82 WAIT_FLG 0 0 0 Player DeMux Manager 40 79 WAIT_FLG 0 0 0 AMBA Editor2 Command Manager 41 83 WAIT_FLG 0 0 0 AMBA Editor2 Mux/Demux Manager 42 66 WAIT_RDTQ 0 0 0 audio_decode_task_1 43 88 WAIT_FLG 0 0 0 App Async Operation Manager 44 58 DELAYED 0 0 0 App Button Manager 45 35 WAIT_FLG 0 0 0 udc_drv_tsk 46 34 WAIT_FLG 0 0 0 UTMMalarmtsk 47 110 RUNNING 0 0 0 ps |
frequencies
Code Block |
---|
a:\> corefreq
core freq: 156000000
ahb freq: 156000000
apb freq: 78000000
arm freq: 504000000
a:\> dramfreq
dram freq: 396000000
a:\> idspfreq
idsp freq: 252000000
|
romfs ls - List ROMFS
...
-minfo all
=========a:\> ============ Window mode Info =====================
* Effective pixels: [ 2688x1520 ]
* The view angle percentage is releated to each aspect ratio.
100% view angle of 16:9 is [ 2688x1512 ]
100% view angle of 4:3 is [ 2026x1520 ]
100% view angle of 3:2 is [ 2280x1520 ]
* Code definiton of the following table.
ID: window id VA: view angle: capture pixel size/sensor effective pixel size
CW: width of capture window CH: height of capture window
BP: pixel bit depth
DH: horizontal downsampling ratio DV: vertical downsampling ratio
AS: aspect ratio FPS: frame rate
tR: row time (in ns) tVB: vb time (in us)
DmW: width of dummy window DmH: height of dummy window
--------------------------------------------------------------------------------
ID VA CW CH DmW DmH BP DH DV AS FPS tR tVB
--------------------------------------------------------------------------------
1 100%(2688x1512) 2688 1512 2688 1512 10 1 1 16:9 60000/1001 10735 450.870000
2 100%(2688x1512) 2688 1512 2688 1512 10 1 1 16:9 45/1 14300 600.600000
3 100%(2688x1512) 2688 1512 2688 1512 10 1 1 16:9 30000/1001 21471 901.782000
4 95%(2560x1080) 2560 1080 2560 1080 10 1 1 21:9 60000/1001 10735 5088.390000
5 95%(2560x1080) 2560 1080 2560 1080 10 1 1 21:9 45/1 14300 6778.200000
6 95%(2560x1080) 2560 1080 2560 1080 10 1 1 21:9 30000/1001 21471 10177.254000
7 75%(2016x1512) 2016 1512 2016 1512 10 1 1 4:3 90000/1001 7157 300.594000
8 78%(2112x1188) 2112 1188 2112 1188 10 1 1 16:9 120000/1001 6781 284.802000
9 100%(2688x1512) 1344 756 1344 756 10 2 2 16:9 180000/1001 6977 286.057000
10 100%(2688x1512) 672 378 672 378 10 4 4 16:9 330000/1001 7205 309.815000
11 100%(2688x3640) 2688 3640 2688 3640 10 1 1 16:9 30000/1001 8689 1737.800000
12 100%(2688x1512) 2688 1512 2688 1512 10 1 1 16:9 50/1 10735 3767.985000
13 100%(2688x1512) 2688 1512 2688 1512 10 1 1 16:9 25/1 21470 7535.970000
14 95%(2560x1080) 2560 1080 2560 1080 10 1 1 21:9 50/1 10735 8405.505000
15 95%(2560x1080) 2560 1080 2560 1080 10 1 1 21:9 25/1 21470 16811.010000
16 75%(2016x1512) 2016 1512 2016 1512 10 1 1 4:3 75/1 7156 2511.756000
17 78%(2112x1188) 2112 1188 2112 1188 10 1 1 16:9 100/1 6779 1945.573000
18 100%(2688x1512) 1344 756 1344 756 10 2 2 16:9 150/1 6980 1389.020000
19 100%(2688x1512) 672 378 672 378 10 4 4 16:9 275/1 7200 914.400000
20 100%(2688x1512) 2688 1512 2688 1512 10 1 1 16:9 30000/1001 10735 17133.060000
21 100%(2688x1512) 2688 1512 2688 1512 10 1 1 16:9 25/1 10735 23767.290000
22 100%(2688x1512) 2688 1512 2688 1512 10 1 1 16:9 40/1 14302 3375.272000
23 95%(2560x1080) 2560 1080 2560 1080 10 1 1 21:9 40/1 14302 9553.736000
24 100%(2688x3640) 2688 3640 2688 3640 10 1 1 16:9 25/1 8688 8375.232000
25 100%(2688x1512) 2688 1512 2688 1512 10 1 1 16:9 275/10 21466 3906.812000
26 100%(2688x1512) 1344 756 1344 756 10 2 2 16:9 120000/1001 6968 3072.888000
27 100%(2688x1512) 1344 756 1344 756 10 2 2 16:9 100/1 6978 4724.106000
28 100%(2688x1512) 1344 756 1344 756 10 2 2 16:9 30000/1001 41865 1716.465000
29 100%(2688x1512) 1344 756 1344 756 10 2 2 16:9 25/1 41797 8401.197000
30 64%(1728x 972) 864 486 864 486 10 2 2 16:9 240000/1001 7178 681.910000
31 64%(1728x 972) 864 486 864 486 10 2 2 16:9 200/1 7173 1513.503000
|
Disk info
Code Block |
---|
a:\> drives --help
3 drives present in system
drive 'A' - NFTL Media
drive 'D' - SD/MMC
drive 'Z' - ROMFS
a:\> cardmgr d info
slot 'd' info
present: yes
type: SDHC memory
name: SD16G0
bus width: 4
total sectors: 30318592
sector size: 512
write-protect: no
format: FAT32
speed: 48000000 Hz
a:\> cardmgr a info
slot 'a' info
present: yes
type: memory
name: SAMSUNG K9F2G08_256MB_PG2K
bus width: 8
total sectors: 425984
sector size: 512
write-protect: no
format: FAT16
speed: N/A
a:\> cardmgr z info
slot 'z' info
present: yes
type: memory
name: ROMFS
bus width: 0
total sectors: 0
sector size: 0
write-protect: yes
format: ROMFS
speed: N/A
|
BAckup firmware
Code Block |
---|
d:\> firmfl gen 5 bst bld pri rom dsp d:\backup.bin
0m[00329995] --- bst ---
[00329995] crc32: 0x214844ba
[00329995] ver_num: 1.3
[00329995] ver_date: 2016/4/9
[00329995] img_len: 2048
[00329995] mem_addr: 0x00000000
[00329995] flag: 0x00000001
[00329997]
loading done.
[00330007] --- bld ---
[00330007] crc32: 0x0d0a7b9d
[00330007] ver_num: 1.3
[00330007] ver_date: 2016/4/9
[00330007] img_len: 132216
[00330007] mem_addr: 0xc0000000
[00330007] flag: 0x00000000
[00330511] 00%
loading done.
[00330528] --- pri ---
[00330528] crc32: 0x5138bfe8
[00330528] ver_num: 0.1
[00330528] ver_date: 2016/4/9
[00330528] img_len: 8441860
[00330528] mem_addr: 0xc0100000
[00330528] flag: 0x00000000
[00365504] 00%
loading done.
[00365508] --- rom ---
[00365508] crc32: 0x3e38f331
[00365508] ver_num: 2.0
[00365508] ver_date: 2016/4/9
[00365509] img_len: 12795904
[00365509] mem_addr: 0x00000000
[00365509] flag: 0x00000001
[00417251] 00%
loading done.
[00417256] --- dsp ---
[00417256] crc32: 0x3b810e6f
[00417256] ver_num: 0.1
[00417256] ver_date: 2016/4/9
[00417257] img_len: 4196352
[00417257] mem_addr: 0xc82fffb0
[00417257] flag: 0x00000000
[00435835] 00%
loading done. |