You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
Version 1
Next »
Githab: https://github.com/Sensirion/arduino-sht
Library: arduino-sht
Connect:
#include <Wire.h>
#include <SHTSensor.h>
SHTSensor sht;
void setup() {
// put your setup code here, to run once:
Wire.begin();
Serial.begin(9600);
delay(1000); // let serial console settle
if (sht.init()) {
Serial.print("Sensor Senserion SHT3X");
Serial.print("\n\n");
} else {
Serial.print("init(): failed\n");
}
sht.setAccuracy(SHTSensor::SHT_ACCURACY_HIGH); // only supported by SHT3x
}
void loop() {
// put your main code here, to run repeatedly:
if (sht.readSample()) {
Serial.print(" T: ");
Serial.print(sht.getTemperature(), 2);
Serial.print(" ");
Serial.print(" RH: ");
Serial.print(sht.getHumidity(), 2);
Serial.print("\n");
} else {
Serial.print("Error in readSample()\n");
}
delay(1000);
}