Page tree
Skip to end of metadata
Go to start of metadata
  1. Power circuit updated to get stable 3.3v and 5.0v on the board
  2. i2c level converted moved to a new board
  3. New connectors inside and outside
  4. New Main Unit to Board cable
  5. SHTC1 and SHTC3 sensors added
  6. mux #1 address changed (to solve i2c address conflict)
  7. 2x BME680 removed (to solve i2c address conflict)
  8. 1x BME280 removed (to solve i2c address conflict)
  9. DHT12 sensors added instead of three BMEx80


Code: https://github.com/liutyi/arduino-humidity-sensors-test


  • No labels